WESCO Palm Sander Tool, 2.0 Amp 1/4 Sheet Palm Sanders for Woodworking, 12,000 OPM Electric Sander Sander with Dust Collector, Punch

Technical Data Voltage 120 V~60 Hz Amps 2 A No load speed 12000 /min Dimension of base 4˝ *4-5/16˝ Orbital dia 1/16˝ Machine weight 3.3 lbs How to Change the Sanding Paper To fit new sanding paper, lift up the clamp lever out of clamp lever lock to loosen the paper clamp, then insert approximately 3/16”(5mm) of one end of the sanding paper under the sanding paper clamp until the paper contacts the housing wall. Lift up the clamp lever and move it to the lever lock position. Wrap the sanding paper around the base plate as tightly as possible and fix the end under the other sanding paper clamp. Your sander is equipped with a dust collection box. To attach, slide the dust box onto the dust extraction outlet piece and take care that the dust box locks in the grooves of the outlet. To empty the dust box, pull off the dust box off of the dust extraction outlet and shake out dust. Note: For more efficient operation, empty dust box every 5-10mins. This will create better air flow and ventilation. The 4˝ *4-5/16˝ large rectangular sanding base pad is more suitable for corners above 90 degrees, square objects or straight edges. It allows you to enter the corner that the random orbit sander are not able to reach, and helps you to finish your work more quickly. Accessories: 1 × Dust box 1 × Dust extraction adaptor 1-1/4”(32mm) 1 × Paper punch 4 × 60 grit clamp sanding paper 4 × 80grit clamp sanding paper 4 × 120 grit clamp sanding paper